![Hargrove Firepit Burners Installation And Operation Manual Download Page 6](http://html.mh-extra.com/html/hargrove/firepit-burners/firepit-burners_installation-and-operation-manual_597442006.webp)
6
INSTALLATION
NATURAL GAS OR LIQUID PROPANE WITH A KEY VALVE
1. Make sure gas is shut off.
2. Connect proper hose to gas supply.
3. Connect the other end of the hose to the valve.
4. Attach the other side of the valve to the flex connecter.
5. Connect the other end of the flex connector to the brass elbow orifice holder.
6. Connect the appropriate orifice. The bigger orifice hole is for NG.
7. Attach the pipe reducing fitting over the orifice.
8. Connect the pipe reducing fitting to the fire-wheel on the side with holes.
9. Finally, connect the plug that came with the fire-wheel to the other side. Note that the holes will be face down
to keep out water and any other debris from falling inside. This will not affect flame height.
CAUTION: WHEN BURNING THE FIREPIT
WITH CINDER FOR THE FIRST TIME IT WILL
POP AND SHOOT OUT. KEEP AT LEAST 10
FEET AWAY FROM THE BURNER DURING
INITIAL BURN IN PERIOD.
LP
NG