Chapter 5 – Configuration
Hardy H6800 Series Application Controllers User Guide
71
Parameter
Description
Zero Amount
Read-only field.
5.5.4 Configuring Communication Parameters
Path:
Home screen > Operation Menu > Setup > Communication
The Communication Setup screen configures the network IP address for the application
controller connected to the network along with the Hardy port.
Parameter
Description
Auto IP Assignment
DHCP
Turns DHCP ON or OFF at the application controller.
Range: ON, OFF
Default: OFF
Dyn IP
Read-only field that shows the application controller’s IP addresses obtained from the DHCP server.
DNS
IP address of the DNS server that the application controller will use.
User Datagram Protocol
Hardy Port
If you use the Hardy port, enter the Hardy port number.
Manual IP Assignment
Fixed IP
If DHCP is OFF, enter the fixed (static) IP address that the application controller will use.
Net Mask
If DHCP is OFF, enter the
that the application controller will use.
Gateway
If DHCP is OFF, enter the
that the application controller will use.
