Hardy Barth CPMICRO1 Instruction Manual Download Page 27

Guarantee specifications and warranty

eCHARGE

 provides the legally prescribed guarantee period as well as a warranty of

the same duration for the country in which the product was purchased. Should the

product  be  operated  in  another   country,   the  legal  provision   of  the   country  of

purchase apply nevertheless: Under no circumstances are guarantees or warranty

transferable.

Should modifications of any kind have been made to the product that have not

been explicitly authorized by 

eCHARGE

 or have been described in the guidelines

of authorized service partners, the manufacturer’s warranty obligations become

void with immediate effect.
Only   the   manufacturer   or   authorized   service   partners   can   repair   on   site.

Transgression leads to the manufacturer’s warranty obligation to become void

with immediate effect.

WARNING!

Should problems occur when operating your product please contact 
immediately your local distributor or an authorized representative to clarify 

whether the malfunction is covered by guarantee and/or warranty provisions.
Do not, 

under any circumstances

, make alterations or repairs to your product 

yourself!

eCHARGE

  guarantees   the   proper   operation   of   the   product   after   delivery   and

installation within lawfully valid warranty. The guarantee is limited to damage that

can be shown to have resulted from normal use and obvious material defects or

manufacturing defects. In such cases the manufacturer will attempt to restore the

proper   function   of  the   product   in   collaboration   with   the   local   distributor.   The

customer will be responsible for covering arising transport costs for the product.
The   manufacturer   rejects   further   damage   claims   that   can   be   shown   to   have

resulted from improper use, neglect or modifications, from repair attempts by

unauthorized persons or force majeure.
Any assumed guarantees, including the guarantee of marketability or suitability for

specific uses are restricted to the warranty period.

Instruction Manual 

cPμ1

 

charging station

Version: 1.3.3

27

Summary of Contents for CPMICRO1




























Reviews: