Preparing the installation
Several requirements regarding the mounting site and connection technology must be met for
the installation in order to guarantee a safe operation.
Requirements for mounting site
The cPμ1 charging station was developed for indoor as well as outdoor areas. As user, please
note the following requirements for the mounting site and installation to ensure safe
charging later on.
• Follow all local regulations concerning electrical installation, fire prevention and
accident prevention
• All regulations to installation a low voltage system according to IEC 60364-1- and
IEC 60364-5-52 apply to any times.
• The mounting surface has to be steady and solid enough to withstand
mechanical pressure.
• The installation position has to provide a lead big enough for the power supply
• Do not install the Wallbox at crowded areas or passage ways. Please make sure
to lay all charging cables in sight and pedestrians or routes are NOT obstructed
in any way.
• Even though basically the cPµ1 is constructed to operate in an environment
with high temperatures, it is highly recommended to install the charging
station at a place, where it is protected of direct sun irradiation. This way,
overheat of the housing can be prevented. You can find more information to
environmental conditions in section “Technical specifications” on page 24.
Instruction Manual
cPμ1
charging station
Version: 1.3.3
14
