Hardinge Talent 10/78, Maintenance Manual

Page: 40 / 104

8. Remove chip pan "L", Figure 4.9, from the
coolant tank.
9. Clean chip pan.
10. Remove three coolant tank screens “M”,
Figure 4.10, from the tank.
11. Remove any coolant remaining in the tank and
wipe the tank clean.
12. Wash the screens and coolant tank with a
cleaner recommended by the coolant
manufacturer to remove any bacterial
contamination.
13. Flush the cleaner from the coolant tank and
clean it as necessary.
14. If the pipe plug was removed in order to drain
the coolant tank, apply pipe sealant to the pipe
plug and thread it into the tank drain.
15. Install the screens in the tank.
16. Fasten the chip pan to the coolant tank with the
chip pan mounting bolts.
17. Align the tank with the machine and roll it into
place.
18. Mount the coolant pump and secure with the
wing bolts.
19. Fill the tank with approved coolant to the FULL
line of the sight gauge, which is approximately
76.62 gallons [290 liters].
4-8 M-448B
Figure 4.9 - Chip Pan and Coolant Tank
TP6028
L
Figure 4.10 - Coolant Tank Screen
M
TP6029