Harding Instruments MicroComm DXL, Operating Instructions Manual

Page: 25 / 44

IMS-640/641 VoIP Intercom Master Station Operating Instructions MicroComn DXL
Page 19 MN-DXL-IMS-640/641-1.0
T Tamper Alarm
Note
: t and d alarms are displayed only at the Secondary Master Station.
ID Number and Name
All the stations in your facility are identified by ID Number and Name. The ID Number is a numeric value
(between 1 and 65,535) assigned to the given station. It has no special significance other than the fact that it is a
unique identification for that station only. The Name describes the Station in terms commonly used in your
facility. The Name may contain any characters, including numbers and punctuation and it may be up to 20
characters long. On the display Stations are identified by both ID Number and Name
List Order
Each list has its own default order. The default order is the order in which the DXL normally displays the Stations
on that list.

Event Queue
Stations are sorted according to call request priority. (The DXL Administrator Software is used to set the
priorities of the Intercom Stations.) If two or more Stations have equal priority, they will appear in the order
in which their call requests were received.

Acknowledged List
Stations are sorted in the order in which they were acknowledged.

Disabled List
The Disabled List display stations in order of Station ID Numbers.

Directory Lists
The order will be by ID Number.
List Sizes
The three numbers on the right hand side of
the display indicate the current number of
Stations on each of the three variable-length
lists:

TOP -- Event Queue

MIDDLE -- Acknowledged List

BOTTOM -- Disabled List
Remember that these values will vary. At
any one time, the list size may be zero or
some number up to the total number of
stations
2002 Housing1Exit 2
Reject
Master Station #20
Accept
Station :131
2003 UnitAOuterExit 6
2001 Housing1Entry 7
Number of Stations
in Event Queue
Number of Stations
in Acknowledge List
Number of Stations
in Disabled List