Harding Instruments MicroComm DXL, Operating Instructions Manual

Page: 15 / 44

IMS-640/641 VoIP Intercom Master Station Operating Instructions MicroComn DXL
Page 9 MN-DXL-IMS-640/641-1.0
Telephone Keypad
The keypad consists of a numeric key set - (0 to 9), (*) and (#) - in a standard telephone layout. These keys are
used to speed up station selection when performing intercom functions and to set level controls.
Navigation Keys
There are four control keys:

The Up-Arrow key and Down-Arrow key are used to scroll through the displayed list of
stations and to adjust settings and volumes.

The Right Arrow key is used to scroll to a new menu

The Left Arrow key is used to scroll back to a previous menu
Function Keys
Function keys are used to perform the
intercom functions that appear beside them
on the display. Each key is associated with
the function name that appears directly
beside it.
If a function name does not appear beside a
function key, the key is not operative. (If you
press it nothing happen).
The functions that you may perform at any
one time will change, according to the keys
you have pressed, the list displayed and the
station selected.
The center arrow head ► indicates additional functions are available and will be displayed if you press the Right-
Arrow key . Additional functions are available
only
if a right-arrow head appears in the center of the bottom
two lines of the display.
Hold Key
The HOLD key ( ) is not used in the operation of the IMS-640/641 and its operation is disabled
Release Key
The RELEASE key ( ) is used to abort a value entry and return to previous settings. (The RELEASE key
operation is similar to the CLEAR key operation in an IMS-440.)
Jul 8, 2008
Master Setup
Answer Next
Master Station #20
Unman
Call
0
01:51 PM 0
0
Additional functions
are available
Function
Keys
Function
Keys
Four Function Keys