Hardi ZENIT 400, Original Instruction Book

Page: 55 / 118

51
4 - Starting up
Transport bracket
The tranport bracket mist secure the boom wing in transport. To
position it, loos the indicated bolts, and adjuste to firm resting position
of the boom, and tighten bolts again.
Inspect weekly the tranposrt bracket , and secure the nylon friction
pars are inatct.
Adjustment of upright
The upright needs to be adjusted for slack between the male and feel
tubes.
Tighten on the two indicated nuts, just to make it press gently on the
inner male tune, if too tight it will not be moveable, too loos it will have
destructive slack.
A nylon friction part is pressed towards the inner male tube; keep it
clean from dust and sand. Replace the nylon friction part when worn.
Adjustment of out spray device
The out spray device is easily adjusted
The manual version is by losing the indicated bolt A, move it to desired
position, and tighten again the bolt.
A