Hardi ZENIT 400, Original Instruction Book

Page: 98 / 118

94
6 - Maintenance
Lubrication
General information
Always store lubricants clean, dry and cool - preferably at a constant temperature - to avoid contamination from dirt
and condensed water. Keep oil filling jugs, hoppers and grease guns clean, and clean the lubricating points thoroughly
before lubricating. Avoid skin contact with oil products for longer periods.
Always follow the quality and quantity recommendations. If no quantity is recommended, feed the lubricator until new
grease becomes visible.
Pictograms in lubrication & oiling plans designate:
1. Lubricant to be used (see “Recommended lubricants” below).
2. Recommended intervals. Shown in hours or with a symbol for
occasional maintenance.
3. Amount to be used. Only shown if an amount is specified.
ATTENTION! If the sprayer has been cleaned with a high
pressure washer, lubrication of the entire machine is
recommended.
Recommended lubricants
What to Lubricate? Lubricant Type Factory Use Recommended Alternatives
BALL BEARINGS and PUMP
Lithium based grease
Consistency NLGI grade 2
Viscosity (@40°C) > 460 cSt SHELL Gadus S3 V550L 1
Hardi pump grease cartridge
(400g): Item no. 28164600 MOBIL grease XHP 462
TOTAL Multis Complex SHD
460
BOLTS Anti-corrosive wax PAVA PV 700 TECTYL 506 WD
VALVES and SEALS (O-RINGS)
NSF 51, NSF 61 silicone
compound
DOW CORNING MOLYKOTE
111
Compound
A
D
D