21
4 - Start up
General information
Important Information
Before using the machinery, it is recommended that you read the instructions to obtain best results and avoid operational
problems.
Unloading the mistblower from the truck
When loading or unloading the mistblower to/from a lorry by using a
lever and pulley or a crane, use the suspension points shown on the
diagram and make sure the straps used are strong enough.
€
DANGER! Nobody must stand below or next to the machine
during loading or unloading.
Before starting up for the first time
Although the surface of the metallic parts of the mist blower have been coated with a strong, protective product, we
recommend you apply a layer of anti-corrosion oil (e.g. CASTROL RUSTILLO or SHELL ENSIS FLUID) to all metal parts to avoid
chemical products discolouring the enamel, as well as to ease future cleaning.
μ
ATTENTION! This treatment should be repeated whenever the protective film wears off.
Counterweights
Check if it is necessary to place a counterweight on the front of the
tractor, to increase the stability and steering performance.
Summary of Contents for ZEBRA AXIAL
