background image

The following safety information is provided as a guideline to help you operate your 3 Piece HVLP Spray Gun Kit under the safest possible conditions.  

Any tool or piece of equipment can be potentially dangerous to use when safety or safe handling instructions are not known or not followed. The 

following safety instructions are to provide the user with the information necessary for safe use and operation. Please read and retain these instructions 

for the continued safe use of your tool. Failure to follow instructions listed below may result in serious injury. In addition, make certain that anyone that 

uses the equipment understands and follows these safety instructions as well.

WARNING

Explanation of Safety Signal Words

 WARNING

:  Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

 CAUTION

:  Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION

:  Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.

NOTES

: Provide clarity and helpful information.

Thank you very much for choosing an OEMTOOLS Product! 

For future reference, please complete the owner’s record below:

Model: _______________ Purchase Date: _______________

Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin 

using it. This product is designed for certain applications only. OEMTOOLS cannot be responsible for issues arising from modification. We strongly 

recommend this product is not modified and/or used for any application other than that for which it was designed. If you have any questions 

relative to a particular application, DO NOT use the product until you have first contacted customer service to determine if it can or should be 

performed on the product. 

Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others by observing 

all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. 

Please retain instructions for future reference.

Operating Instructions and Parts Manual 

25822

01/16

2016 OEMTOOLS

3 PIECE HVLP

 

SPRAY GUN KIT

UNPACKING

After unpacking unit, inspect carefully for any damage 

that may have occurred during transit. Check for loose, 

missing, or damaged parts. If any damage is observed, 

a shipping damage claim must be filed with carrier. Do 

not use the OEMTOOLS 3 Piece HVLP Spray Gun Kit 

if broken, bent, cracked or damaged parts (including 

labels) are noted. Any 3 Piece HVLP Spray Gun Kit that 

appears damaged in any way, operates abnormally 

or is missing parts should be removed from service 

immediately. If you suspect that the 3 Piece HVLP Spray 

Gun Kit was subjected to shock load (a load that was 

dropped suddenly, unexpectedly, etc.) immediately 

discontinue use until it has been checked by a factory 

authorized service center.

Summary of Contents for 25822









Reviews: