64
5 - Operation
TurboFiller rinsing
Rinsing the TurboFiller and chemical containers is done in the following two ways:
When TurboFiller lid is open
For cleaning empty containers: put container over the rotating fl ushing nozzle in the middle of the TurboFiller so that the
nozzle is inside the container. Press the Chemical Container Cleaning lever and the TurboFiller suction valve at the same
time to activate the fl ushing nozzle in the middle of the TurboFiller and empty out the TurboFiller rinsing liquid.
When TurboFiller lid is closed
Use the Chemical Container Cleaning lever to rinse the hopper after fi lling of chemicals has ended. Press the Chemical
Container Cleaning lever and the TurboFiller suction valve at the same time to activate the fl ushing nozzle in the middle of
the TurboFiller and empty out the TurboFiller rinsing liquid. Do this 3 times and after the last fl ushing open the lid to inspect
if the TurboFiller is empty. If not, close the lid again and press the TurboFiller suction valve until the TurboFiller is empty.
ATTENTION! The TurboFiller needs to be cleaned thoroughly after fi nishing spraying again to be sure it is clean
before spraying other crops that may be sensitive to the chemicals just used. See section Cleaning for details.
