50
4 - Starting up
Adjustment of BOXER boom
Important to avoid destructive slack in the telescoping part, the slack
must be adjusted.
Loosen counter bolt A tighten in bolt B , not to press into the telescoping
boom part, but just hold it fi rmly and avoid slack. Tighten counter nut
again.
Grease the part every 200 hours or annually..
The indicated nylon friction parts must be kept clean, avoid sand and
dust in them.
Replace when worn.
CRONOS BOOM
Exist as SOLID , RIDER , GV or VARIA
SOLID
7.1 mts boom width, the spray device can easily be positioned on the
boom with or in the centre section
The boom’s wing is equipped with a non-adjustable rubber suspension,
to absorb the knocks from driving in the fi eld. Be sure the rubber part
is intact, and bolts are in place with luck part threaded well in the bolt.
B
A
B
