Hardi JAZZ, Instruction Book

Page: 7 / 36

7
Always STOP ENGINE and remove the ignition key before carrying out
maintenance or repairs to the transmission shaft or implement.
Installation of transmission shaft
Initial installation of the shaft is done as follows:
1. Attach sprayer to tractor and set sprayer in the position with shortest
distance between the tractor and sprayer pump P.T.O. shafts.
2. Stop engine and remove ignition key.
3. If transmission shaft must be shortened, the shaft is pulled apart. Fit the
two shaft parts at tractor and sprayer pump and measure how much it
is necessary to shorten the shaft. Mark the protection guards.
4. The two parts are shortened equally. Use a saw, and file the profiles
afterwards to remove burrs.
5. Grease the profiles, and assemble male and female parts again.
Note: The shaft must always have a minimum overlap 150 mm.