WEIGHSAFE SCALE OPERATING INSTRUCTIONS
1. Weight Display
2. KG indicator
3. Motion Indicator
4. DISPLAY button
5. ZERO button
6. ON/OFF button
Turning on the WeighSafe Scale:
Turn the scale on by pressing the “ON/OFF” button
once.
The “HARD Manufacturing” logo will appear on the
display screen followed by the current weight.
The WeighSafe Scale may be used with the crib in
any position. The head elevation, foot elevation
and Hi-Lo adjustment will not affect the accuracy of
the WeighSafe Scale.
The scale is designed to be left on at all times and
will always display the current weight. There is no
need to turn the scale off.
To weigh a patient:
Follow your hospital protocol to weigh a patient.
You must ZERO out for an accurate weight
reading.
Remove the child from the crib.
Press the “ZERO” button.
Place the child back in the crib.
The current weight of the patient will immediately
be displayed in kilograms. The WeighSafe Scale
operates only in kilograms.
If the word “Motion” appears on the display, wait a
few seconds for the crib to stabilize. The crib must
be stable to weigh accurately.
Display Light:
WEIGHSAFE SCALE QUESTIONS OR PROBLEMS
Please contact:
HARD Manufacturing Co., Inc.
Parts Department
800-873-4273 or [email protected]
*Any attempt to disassemble or repair the scale will void the warranty.*
The display backlight will go off after 60 seconds.
Press the “DISPLAY” button to illuminate the
backlight again.
6
