HARD GEAR SGB16500VSa, Instruction Manual

Page: 20 / 36

- 19 -
Engine oil change
Drain the oil while the engine is warm to assure rapid and complete draining.
1) Remove the drain plug and sealing washer, oil filler cap, and drain the oil.
2) Reinstall the drain plug and sealing washer. Tighten the plug securely.
3) Refill with the recommended oil and check the level.
In case of removing the drain pipe, please control the extended pipe by spanner.
Oil filler cap
Oil capacity:
2.3
ℓ
(2.42 US qt , 2.03 lmp qt)
Drain plug
Use some tray
Engine oil filter change
1) Drain the oil from the engine.
2) remove the oil filter and dispose of properly.
Used an oil filter socket, rather than a strap wrench, to avoid striking and damaging
the oil pressure switch.
3) Before installing the new oil filter, lightly lubricate the oil filter gasket with fresh,
clean oil.
4) Install the oil filter by hand until the gasket contacts the oil filter adapter, then