HARD GEAR SGB16500VSa, Instruction Manual

Page: 16 / 36

- 15 -
When the speed of the starter motor drops after a period of the time, it
is the indication that the battery should be recharged.
5) After the engine starts, let the engine switch return to “ON”.
6) If you have manually closed the choke, move it to the “OPEN” position as the
engine warms up.
2. APPLYING AC LOAD
1) Start engine (see STARTING THE ENGINE).
2) Allow the engine to warm up for 2-3 minutes before connecting tools or
appliances.
3) Insert the plug of the electrical appliance into “AC RECEPTACLE”.
4) Turn the circuit breaker knob to the on position.
** Do not take a current exceeding the specified amperage.
** Be sure that total wattage of all appliances does not exceed the rated output of the
generator.
When the generator is overloaded or a short circuit is made, the CIRCUIT BREAKER will
trip to protect the circuit automatically. If CIRCUIT BREAKER trips during operation, the
generator is either over loaded or the appliance is defective.
Check the appliance and / or generator for overloading or defect make necessary
corrections or repairs before use.
BE SURE THAT THE TOTAL WATTAGE OF ALL APPLIANCES DOES NOT
EXCEED THE RATED OUTPUT OF THE GENERATOR.