background image

Visit our website at: http://www.harborfreight.com

 Email our technical support at: [email protected]

Owner’s Manual & Safety Instructions

Save This Manual

 

Keep this manual for the safety warnings and precautions, assembly, 

operating, inspection, maintenance and cleaning procedures.  Write the product’s serial number in the 
back of the manual near the assembly diagram (or month and year of purchase if product has no number). 
Keep this manual and the receipt in a safe and dry place for future reference.

 

17e

When unpacking, make sure that the product is intact 

and undamaged.  If any parts are missing or broken, 

please call 1-888-866-5797 as soon as possible.

Copyright

©

 2017 by Harbor Freight Tools

®

.  All rights reserved.  

No portion of this manual or any artwork contained herein may be reproduced in 

any shape or form without the express written consent of Harbor Freight Tools.  

Diagrams within this manual may not be drawn proportionally.  Due to continuing 

improvements, actual product may differ slightly from the product 

described herein.  Tools required for assembly and service may not be included.

Read this material before using this 
product.  Failure to do so can result in 
serious injury.  SAVE THIS MANUAL.

Summary of Contents for VULCAN MIG GUN LINER

Page 1: ...rence 17e When unpacking make sure that the product is intact and undamaged If any parts are missing or broken please call 1 888 866 5797 as soon as possible Copyright 2017 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools Diagrams within this manua...

Page 2: ...ow children to play with or near this item 8 Use as intended only 9 Inspect before installing do not use if parts are loose or damaged Installation Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document before set up or use of this product 1 Disconnect welder power supply and discharge electrode to ground 2 Disconnect MIG Gun Cable from welder 3 Remove ...

Page 3: ...ke sure the end of the new Liner remains open while cutting and remove any Liner pieces that are left hanging after cutting 9 Insert the new Liner into the end of the MIG Connector until it is fully inserted Make sure the O ring seats properly into the Connector 10 Hold the new Liner in place in the MIG Connector while securing it in place using the Set Screw on the side of the MIG Connector 11 Re...

Page 4: ...n of incidental or consequential damages so the above limitation of exclusion may not apply to you THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS To take advantage of this warranty the product or part must be returned to us with transportation charges prepaid Proof of purchase date and an explanation of the comp...

Reviews: