T
HANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please
complete the owner’s record below:
Model______________
Serial No._____________
Purchase Date_______________
SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the
entire manual to become familiar with the unit BEFORE you begin assembly.
Technical Specifications
Storage Trays:
(3) 25-3/4” x 4-1/4” x 3-1/2”
Shelf with Attached Tube:
25-3/8” x 16” x 5-1/8”
Weight Capacity:
25 Lbs. Each Tray; 50 Lbs. Shelf; 125 Lbs. total weight capacity
Includes:
Fold Down Shelf and Towel Tube mounted beneath the Shelf
Safety Warnings and Precautions
WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Keep work area well lit. Make certain work area is clean,
uncluttered and free of debris.
3.
Store idle equipment. When not in use, products must be stored in a dry location to inhibit
damage from moisture and salt air.
4. Check for damaged parts. Before using any product, any part that appears damaged should
be carefully checked to determine that it will operate properly and perform its intended function.
Check for any broken or damaged parts and any other conditions that may affect its operation.
Replace or repair damaged or worn parts immediately.
5.
Replacement parts and accessories. When servicing, use only identical replacement parts.
Use of any other parts will void the warranty.
6.
Always check hardware and assembled parts after assembling. All connections should be
tight and hardware tightened.
7.
Keep children away. Children must never be allowed in the work area.
8.
Use the right product for the job. There are certain applications for which this product was
designed. It will do the job better and more safely at the rate for which it was intended. Do not
modify this product and do not use this product for a purpose for which it was not intended.
9.
Do not operate product if under the influence of alcohol or drugs. Read warning labels on
prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there
is any doubt, do not operate the product.
10. Use eye protection. Always wear ANSI approved impact safety goggles during assembly.
11. Wear gloves and avoid sharp edges when assembling.
12. Follow all mounting warnings - see page 3.
SKU 90928
Page 2
For technical questions, please call 1-800-444-3353.
