Page 10
For technical questions, please call 1-888-866-5797.
ITEM 57531
S
AFETY
S
ETU
p
INST
ALLA
TION
M
AINTENANCE
Fuel Line
1. Locate the fuel line connector on the Carburetor.
2. Attach the outlet fuel line from the fuel pump
(not included, see 2.b. under
Install Fuel Pump
)
to the connector on the Carburetor. Route
Carburetor drain hose to safe drain area.
Note:
Ensure that the drain hose is
routed to avoid heat and abrasion.
Fuel Line
Connector
Carburetor
Carburetor
Outlet Fuel Line Connection
Install Air Filter, Throttle Cable, Oil Breather Tube
1. Install an air filter using a filter clamp (both
not included) to the Carburetor inlet.
2. Connect one end of a throttle cable (not included)
to the Carburetor slide. Connect the other
end to the throttle on the go-kart frame.
Note:
This engine is not equipped with a governor.
Install a throttle return spring before use.
3. Insert one end of an oil breather tube (not
included) into the hole on the Valve Cover.
Route the other end of the tube to an overflow
can (not included). If necessary, attach an
extension tube (not included) to the end of the
oil breather tube to reach the overflow can.
Note:
Ensure that oil breather flow is
not restricted by tubing or overflow can,
which must be vented to atmosphere.
Carburetor
Inlet
Throttle
Cable Boot
Valve Cover
Oil
Oil
Breather
Breather
Tube
Tube
Hole
Hole
Air Filter / Throttle Cable / Oil Breather Tube
