SKU 44983
For technical questions please call 1-800-444-3353. Page 4
3.
To install the Handle (10) first locate it and slide it onto the Screw (8) as in Figure 2.
Insert Lock Screw (6) to secure it in place.
Handle (10)
Lead Screw (8)
Figure 2
4.
To open the Plain Jaw (1), turn the Handle (10) counterclockwise until the jaws are at the
desired width. Insert your workpiece.
5.
Turn the Handle (10) clockwise to tighten the Plain Jaw (1) on the workpiece. Do not
overtighten the Vise on the workpiece; damage may occur to the workpiece.
6.
When you are finished, turn the Handle (10) counterclockwise to remove your
workpiece from the jaws.
7.
The Machine Vise has a Scale (24) to set degree and location of the workpiece. Numerical
orientation is marked on the Scale (24) and can be set by lining up the number on the scale
with the metal clover shaped tab on the Scale (24) as in Figure 3. Move the Vise by
loosening the Hex Nut (13) and rotating the Vise to desired degree setting. Retighten Hex
Nut (13).
Figure 3
Replacing Plain Jaws (1)
1.
To remove the Plain Jaws (1), unscrew the Inner Turret Screws (2). Pull off the Plain
Jaws (1) and replace with a new set-see Figure 4. Replace the Turret Screws (2)
see Figure 4.
Inner Turret Screw (2)
Figure 4
Plain Jaw (1)
Lock Screw (6)
marker
Scale (24)-currently
set at “0”
Brought to You by Augusta Flint
