background image

SKU 44983

For technical questions please call 1-800-444-3353.             Page 2

THANK YOU for choosing a HARBOR FREIGHT TOOLS product.  For future reference, please
complete the owner’s record below:

Model______________

Serial No._____________

Purchase Date_______________

SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS.  It is important that you read the
entire manual to become familiar with the unit BEFORE you begin assembly.

Technical Specifications

Jaw Width:

6-1/4”

Throat Depth:

1-7/8”

Maximum Jaw  Opening:

5-7/8”

Base  Dimensions:

16-7/8” x 8-3/4”

Base Swivel Capacity:

Flat mount

Mount Holes:

2

Mount Holes Diameter:

3/4”

Anvil Dimensions:

6-3/4” X 6”

Overall Dimensions:

16-7/8” x 8-3/4” x 5”

                         Vise Weight                            72 Lbs.

Safety Warnings and Precautions

WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1.

Keep work area clean.  Cluttered areas invite injuries.

2.    Check for damaged parts.  Before using any product, any part that appears damaged should

be carefully checked to determine that it will operate properly and perform its intended function.
Check for any broken or damaged parts and any other conditions that may affect its operation.
Replace or repair damaged or worn parts immediately.

3.

Replacement parts and accessories.  When servicing, use only identical replacement parts.

Use of any other parts will void the warranty.

4.

Always check hardware and assembled parts after assembling.  All connections should be

tight and hardware tightened.

5.

Keep children away.  Children must never play with the Vise.

6.

Dress properly.  Gloves are recommended when using the Vise.  Wear restrictive hair covering

to contain long hair.

7.

Use eye protection.  Always wear ANSI approved impact safety goggles when using this

product.

8.

Maintain product with care.  Keep the Vise in a dry location.  Keep the Vise clean of grease

and metal filings.

Brought to You by Augusta Flint

Summary of Contents for Pittsburgh 44983







Reviews: