SKU 93867
For technical questions, please call 1-800-444-3353
Page 2
Specifications
Construction: Lightweight composite housing with ma-
chined steel and aluminum components
Air Pressure
Specifica-
tions:
Operating Pressure: 90 PSI
Rated Air Consumption: 7 CFM @ 90
PSI
Air Inlet Size: ¼” - 18 NPT
No Load rpm: 10,000 RPM
Trigger Type:
Paddle
Disc Size:
standard 6”
Spindle Size:
5/16” x 24 TPI, female threads
Dimensions:
5-5/8”L x 4”W x 3-5/8”H
Net Weight:
1.9 lbs.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions, operat-
ing and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the
invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for
future reference.
Safety Warnings and Precautions
WARNING:
When using tool, basic safety precautions should always be followed to reduce the risk
of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean
. Cluttered areas invite injuries.
2.
Observe work area conditions
. Do not use tools in damp or wet locations. Don’t expose to rain. Keep
work area well lit. Do not use electrically powered tools such as an air compressor in the presence of
flammable gases or liquids.
3.
Keep children away
. Children must never be allowed in the work area. Do not let them handle
machines, tools, or extension cords.
4.
Store idle equipment
. When not in use, tools must be stored in a dry location to inhibit rust. Always
lock up tools and keep out of reach of children.
5.
Use the right tool for the job
. Do not attempt to force a small tool or attachment to do the work of a
larger industrial tool. There are certain applications for which this tool was designed. It will do the job
better and more safely at the rate for which it was intended. Do not modify this tool and do not use this
tool for a purpose for which it was not intended.
6.
Dress properly while working
. Do not wear loose clothing or jewelry as they can be caught in moving
parts. Protective, electrically nonconductive clothes and nonskid footwear are recommended when
working. Wear restrictive hair covering to contain long hair.
7.
Use eye protection
. Always wear ANSI-approved impact safety goggles. Wear a full face shield if
you are producing metal filings or wood chips. Wear an ANSI-approved dust mask or respirator when
working around metal, wood, and chemical dusts and mists.
8.
Do not overreach
. Keep proper footing and balance at all times. Do not reach over or across running
