Page 5
SKU 46725
4.
Assembly the other two Legs with the Short Middle Frame (5) and the Short Lower
Frame (7).
Use Screws (12) through the Height Adjuster, Screws (13) through Short Lower Frame
(7), and Washers (15). Tighten securely.
5.
Slide the Middle Wood Plate (2) into the Long Middle Frames (4)
6.
Slide the Lower Wood Plate (3) into the Long Lower Frames (6).
7.
Attach the Leg subassembly (done in step 4) to the extending Long Middle Frames (4)
and the Long Lower Frames (6).
Use Screws (12) through the Height Adjuster, Screws (13) through Short Lower
Frame (7), and Washers (15). Tighten securely.
8.
Place the Wood Table Top (1) upside down on the floor, exposing the mounting holes.
9.
Mount the Connector Brackets (10) using Screws (16). Tighten securely.
10.
Place the completed frame assembly (Height Adjuster brackets facing down) over the
Connector Brackets and secure with Screws (13), and Washers (15). Tighten securely.
Refer to illustration “D” on the Assembly Drawing.
11.
Turn the completed Work Station over so that it stands on its feet.
12.
Stick the Magnetic Strips (17 and 18) to the Long Middle Frame (4) and the Short
Middle Frame (5). These magnetic strips can be used to hold light metal objects such
as tools.
Caution: Maximum Weight Capacity = 1,000 Lbs. dead load. Do not exceed this maxi-
mum weight capacity.
Caution: Only use normal sized table top equipment on this Work Station. Oversized or
overweight equipment can damage, and possibly collapse the Work Station.
Maintenance
1.
Periodically check and tighten all Screws and Nuts on the Work Station assembly.
2.
Store the Work Station in a clean and dry location.
3.
When moving, do not drag the Work Station. Left and carry.
REV 07/03
