background image

SKU 99598/99599 

For technical questions, please call 1-800-444-3353. 

Page 3

 

Warning 

indicates a 

hazardous situation which, if 

not avoided, could result in 

death or serious injury.
 

caUtiOn, used 

with the safety 

alert symbol, indicates a 

hazardous situation which, if 

not avoided, could result in 

minor or moderate injury.
 

nOtice is used to 

address practices 

not related to personal injury.
 

caUtiOn, without 

the safety alert 

symbol, is used to address 

practices not related to 

personal injury.

read and Understand all 

instrUctiOns

When using electrical appliances, 

safety precautions should always 

be followed including the follow-

ing:

Work area safety

Do not use outdoors.

1. 

Do not place on or near a hot gas or 

2. 

electric burner, or in a heated oven.
Extreme caution must be used when 

3. 

moving appliance.
Keep the work area well lit.  Make 

4. 

sure there is adequate surrounding 

workspace.  Keep the work area free 

of obstructions and other debris.

electrical safety

1. 

To protect against electri-

cal shock do not immerse 

cord, plugs, or the main 

unit in water or other 

liquid.  Only the removable 

non-electrical parts of the unit may be 

immersed for cleaning. Thoroughly 

clean and dry these parts prior to first 

use and before every subsequent 

use.
This appliance has a polarized plug 

2. 

(one blade is wider than the other).  

To reduce the risk of electric shock, 

this plug is intended to fit into a polar

-

ized outlet only one way.  If the plug 

does not fit fully in the outlet, reverse 

the plug.  If it still does not fit, contact 

a qualified electrician.  Do not change 

the plug in any way.
Do not use this product in a damp or 

3. 

wet location.
Do not clean with metal scouring 

4. 

pads.  Metal pieces can break off the 

pads and touch electrical parts involv-

ing risk of shock.

power cord safety

1. 

A  short  power  supply  cord  is  to  be 

provided  to  reduce  risks  resulting 

from becoming entangled in or trip-

ping over a longer cord. 

2. 

Do not use with any type of extension 

cord.

Hot surface safety

Do not operate the appliance near 

1. 

draperies, curtains, and walls.  These 

flammable materials may catch fire 

from this electric appliance.

Summary of Contents for 99598














Reviews: