SKU 98279
For technical questions, please call 1-800-444-3353.
Page 7
changing the Battery
Make certain when changing the bat-
1.
tery to replace with a battery of the
same type.
Set the Wall Clock over a surface that
2.
will allow you to recover any dropped
screws.
Remove the back from the Wall Clock
3.
by unscrewing each of the twelve
screws.
3V Lithium
Battery,
CR2032
Figure 2
4. Remove backing from Wall Clock.
Slide battery out from battery holder
with the end of a flat screwdriver (not
included.) Replace with new 3V,
CR2032 battery. Replace back cover
and thread in twelve screws.
warning!
5.
Do not modify or make
adjustments any other electrical com-
ponents.
Any other maintenance beside
6.
changing of the battery should be
done by a qualified service techni
-
cian.
cleaning and
maintenance
Clean the outside of the Wall Clock
1.
with a soft, dry cloth as necessary.
Do not use harsh abrasives or materi-
als to clean the Wall Clock as these
will damage both the finish and LED
readout.
Replace the Battery every 6 months
2.
or when necessary. See section on
Changing the Battery on this page.
pleaSe read tHe Following careFullY
THE MANUFACTURER AND/OR DISTRIBUTOR
HAS PROVIDED THE PARTS LIST AND
ASSEMBLy DIAGRAM IN THIS MANUAL AS
A REFERENCE TOOL ONLy. NEITHER THE
MANUFACTURER OR DISTRIBUTOR MAKES
ANy REPRESENTATION OR WARRANTy OF
ANy KIND TO THE BUyER THAT HE OR SHE
IS qUALIFIED TO MAKE ANy REPAIRS TO THE
PRODUCT, OR THAT HE OR SHE IS qUALIFIED
TO REPLACE ANy PARTS OF THE PRODUCT.
IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR ExPRESSLy STATES THAT
ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN By CERTIFIED
AND LICENSED TECHNICIANS, AND NOT By
THE BUyER. THE BUyER ASSUMES ALL RISK
AND LIABILITy ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISING
OUT OF HIS OR HER INSTALLATION OF
REPLACEMENT PARTS THERETO.
record product’s Serial number Here:
note:
If product has no serial number,
record month and year of purchase
instead.
Battery Holder
