![background image](http://html.mh-extra.com/html/rca/rc65i/rc65i_user-manual_332934001.webp)
Washington
Oregon
Arizona
New Mexico
Texas
Oklahoma
Kansas
Colorado
Utah
Nevada
California
Idaho
Montana
North Dakota
Nebraska
Minnesota
Iowa
Missouri
Arkansas
Mississippi
Alabama
Louisiana
Florida
Georgia
Wisconsin
Illinois
Indiana
Ohio
Michigan
New Jersey
New York
Conn.
R.I.
Mass.
N.H.
Maine
Wyoming
Pennsylvania
Virginia
Virginia
West
Delaware
Md.
Vt.
Carolina
North Carolina
South
Olympia
Boise
Helena
Salt Lake City
Pierre
Cheyenne
Lincoln
St. Paul
Des Moines
Madison
Lansing
Harrisburg
Trenton
Providence
Hartford
Concord
Albany
Montpelier
Augusta
Carson City
Phoenix
Santa Fe
Denver
Oklahoma City
Austin
Jefferson City
Little Rock
Jackson
Springfield
Indianapolis
Montgomery
Columbus
Charleston
Columbia
Atlanta
Richmond
Raleigh
Annapolis
Boston
Washington, D.C.
Topeka
New York
Chicago
Miami
Philadelphia
Detroit
Houston
Dallas
Seattle
Las Vegas
Los Angeles
San Francisco
Sacramento
Memphis
New Orleans
St. Louis
Baton
Rouge
Salem
Bismarck
South Dakota
Tennessee
Kentucky
Nashville
Frankfort
Pacific Mountain
Central
Eastern
Summer
Winter
Winnipeg
Saskatoon
Regina
Yukon
Territory
Alberta
Saskatchewan
Manitoba
Ontario
British
Columbia
Quebec
Newfoundland
Northwest Territories
Nunavut
Pacific
Atlantic
Hawaii-
Aleutian
Alaska
Mountain Central
Eastern
Summer
Winter
Atlantic
Puerto Rico
(AST)
(EST)
(CST)
(MST)
(PST)
(HST)
(AKST)
(AST)
(EST)
(CST)
(MST)
(PST)
AM Antenna
For AM reception, connect the AM
antenna loop to the back of the radio.
Stretch out the antenna cord to its
fullest length and rotate the antenna
for better reception.
Station presets
To store a station as preset:
1. Tune to a radio station.
2. Press
STORE
.
• An available preset location
(e.g.
) shows on the display.
3. Press
<<
or
>>
(or
RECALL
) to select
a desired preset location (1 - 20).
4. Press
STORE.
•
shows on the display as
confi rmation.
•
You can save up to 20 preset
stations.
To recall a preset station:
1. In radio mode, press
RECALL
.
• The existing preset station number
shows on the display.
2. Press
<<
or
>>
(or
RECALL
) to select
a desired preset station.
• Only use attachments/accessories
specifi ed by the manufacturer.
• Use only with the cart,
stand, tripod, bracket,
or table specifi ed by
the manufacturer, or
sold with the apparatus.
When a cart is used, use caution
when moving the cart/apparatus
combination to avoid injury from
tip-over.
• Unplug this apparatus during
lightning storms or when unused
for long periods of time.
• Refer all servicing to qualifi ed
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such
as power-supply cord or plug is
damaged, liquid has been spilled
or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.
ADDITIONAL SAFETY INFORMATION
• Main plug is used as disconnect
device and it should remain readily
operable during intended use. In
order to disconnect the apparatus
from the mains completely, the
mains plug should be disconnected
form the mains socket outlet
completely.
To listen to the auxiliary player:
• If an auxiliary player (e.g. mp3
player) is connected, press
AUX
to
select AUX mode and start playback
on your auxiliary player.
To change or check the remaining
time in sleep mode:
• Press
SLEEP
once to check the
remaining sleep time. Press
SLEEP
repeatedly to select another sleep
time.
To cancel the sleep mode:
• If you decide to turn off the unit
sooner, press
SNOOZE
,
OFF
or press
SLEEP
repeatedly to select “OFF”.
user
manual
guide de l’utilisateur
EN/F
It is important to read this user manual prior to using your new product for the fi rst time.
Nous vous recommandons de lire ce manuel avant d’utiliser votre nouveau produit
pour la première fois.
RC65i
v2.0 (EN/F)
FCC information
This equipment has been tested and
found to comply with the limits for
a Class B digital device, pursuant to
Part 15 of FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses, and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee
that interference will not occur in a
particular installation. If this equipment
does cause harmful interference to
radio or television reception, which
can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
• Consult the dealer or an
experienced radio/TV technician for
help.
Modifi cations not expressly approved
by the party responsible for compliance
could void the user’s authority to
operate the equipment.
This Class B digital apparatus complies
with Canadian ICES-003.
Cet appareil numérique de la classe B
est conforme à la norme NMB-003 du
Canada.
Manufacturer/Responsible Party
Audiovox Electronics Corp.,
150 Marcus Blvd., Hauppauge, NY 11788
For your records
In the event that service should be
required, you may need the model
number and the serial number. In the
space below, record the date and place
of purchase and the serial number:
Model No.:
Date of Purchase:
Place of Purchase:
Serial No.:
Technical information
Product: Clock Radio
Brand: RCA
Model: RC65i
Electrical consumption
Power Supply: 120V ~ 60Hz
Power Consumption: 15 Watts
iPhone is a trademark of Apple Inc.
iPod is a trademark of Apple Inc.,
registered in the U.S. and other
countries.
Apple is not responsible for the
operation of this device or its
compliance with safety and regulatory
standards.
PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE
IMPORTANT SAFETY INSTRUCTIONS
Before you begin
General controls
Clock
Canadian time zones
US time zones
Radio
iPod/iPhone
Wake function
Some of the following information may
not apply to your particular product;
however, as with any electronic product,
precautions should be observed during
handling and use.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near
water.
• Clean only with dry cloth.
• Do not block any ventilation
openings. Install in accordance with
the manufacturer’s instructions.
• Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
amplifi ers) that produce heat.
• Do not defeat the safety purpose
of the polarized or grounding-type
plug. A polarized plug has two
blades with one wider than the
other. A grounding type plug has
two blades and a third grounding
prong. The wide blade or the third
prong is provided for your safety. If
the provided plug does not fi t into
your outlet, consult an electrician
for replacement of the obsolete
outlet.
• Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
• Apparatus shall not be exposed to
dripping or splashing and no objects
fi lled with liquids, such as vases,
shall be placed on the apparatus.
• Always leave suffi cient space around
the product for ventilation. Do
not place product in or on a bed,
rug, in a bookcase or cabinet that
may prevent air fl ow through vent
openings.
• Do not place lighted candles,
cigarettes, cigars, etc. on the
product.
• Connect power cord only to AC
power source as marked on the
product.
• Care should be taken so that objects
do not fall into the product.
• Do not attempt to disassemble
the cabinet. This product does
not contain customer serviceable
components.
• The marking information is located
at the bottom of apparatus.
• Caution marking is located at
bottom of apparatus.
WARNING:
TO PREVENT FIRE
OR ELECTRICAL
SHOCK HAZARD, DO
NOT EXPOSE THIS
PRODUCT TO RAIN
OR MOISTURE.
Plugging in for power
• Insert the plug of the unit into an
AC power outlet.
• AC OUTLET POWER SUPPLY:
120V~60Hz
• Power is fed to the unit even when
it is not functioning. To cut the
power supply off, the power cable
must be unplugged.
Refer to the “Clock” section and
follow the instructions to get the
clock time shown correctly with the
Auto Clock set feature.
Battery back-up operation
This clock radio is equipped with a
memory holding system that can
be powered with 2 “AA” batteries
(included and installed). The power
failure protection circuit will not
operate unless battery is installed. When
normal household power is interrupted,
or AC line cord is unplugged, the
batteries will power the clock radio to
keep track of time and alarm settings
programmed into memory. When the
battery backup functions, the digital
display will not light, however, the
function of alarm still occurs during the
power interruption if remaining battery
power is adequate. Normal operation
will resume after AC power is restored
so you will not have to reset the time or
the alarm.
To install or replace the batteries:
1. Remove battery compartment door
(located at the bottom of the radio)
by applying thumb pressure to the
tab on battery door and then lift
the door out and off the cabinet.
2. Insert or replace 2 AA batteries.
3. Replace the compartment door.
• It is recommended that you replace
the batteries every year.
• It is recommended to plug the
unit for AC power while replacing
batteries to avoid the loss of clock
and wake time/mode settings.
Power failure indicator
When external DC power is interrupted
(disconnected) for a short period of
time, both time and alarm settings
will change (unless batteries are
installed). After AC power is restored
(reconnected), the Digital Display
will blink to indicate that power was
interrupted and you should readjust the
time and alarm settings.
Front view
Off (standby mode)
Universal dock for iPod
(push to open or close)
Sound source selection
Display
Top view
Setting clock manually
In case the memory holding batteries
are accidentally removed, set the clock
manually as below:
1. Press
SET
on the top of the unit
until the clock setting icon
fl ashes on the display.
2. Press
<<
or
>>
on the top of the
unit to set the clock time. The time
decrements or increments follow by
a faster rate when you press and
hold the button.
• The clock setting icon
fl ashes
when you are setting the time. AM
or PM icon also lights beside the
time.
3. To save and exit the clock setting,
wait for about 5 seconds or press
SET
until the clock setting icon (
) is off and the wake setting icons (
/
/
or /
/
) are either
off or stop fl ashing.
Display brightness
Press
BRIGHTNESS
to dim the display
and press again to restore to the
original brightness level.
Listening to the radio
To turn on or off radio:
1. Press
RADIO
on the front of the
unit to turn on the radio.
• The radio mode icon ( ) lights on
the display.
2. Press
OFF
to turn off the radio, or
press
AUX
or
iPod
to select another
sound mode.
To select radio band:
• In radio mode, press
RADIO
to
select the radio band (AM/FM).
• The selected radio band icon lights
on the display.
To tune frequency:
• Press
<<
or
>>
. The selected
frequency shows on the display.
• Press and hold to automatically
search for the next available station.
Antenna
Built-in AFC
The Built-in Automatic Frequency
Control (AFC) works only on FM. It helps
reducing drift on FM reception and
keeping the radio locked in on the FM
station to which it is tuned.
When tuning in FM stations, you may
notice that the station you are tuning
can be well-tuned on two or three
nearby points. Always tune carefully at
the loudest and clearest point.
Listening to iPod/iPhone
To connect iPod/iPhone:
1. Push the universal dock for iPod on
the front of the unit to open it.
2. Four adapters are supplied. Check
the table below and use the
appropriate adapter for your iPod/
iPhone.
Models
Adapters
iPhone 4 GB, 8 GB, and
16 GB
12
iPod nano (3rd
generation) 4 GB and
8 GB
13
iPod touch
14
iPhone 3G
15
• For the latest iPod/iPhone models,
please use the adapter provided
with your iPod/iPhone.
3. Place the adapter and then your
iPod/iPhone on the universal dock
for iPod.
To select iPod mode:
• Press
iPod
on the front of the unit
to select the iPod mode.
• The iPod mode icon ( ) lights on
the display.
• Playback from the iPod/iPhone starts
automatically.
iPod/iPhone
To control the playback:
1. During playback, press
iPod
to
pause the playback and press again
to resume.
2. Press
<<
or
>>
to skip to the
previous or next fi le.
• Press and hold
<<
or
>>
to search
backward or forward.
3. Press
SHUFFLE
to play the fi les in
random order in the iPod/iPhone.
Press again to cancel the function
(shows on the iPod/iPhone display).
4. Press
REPEAT
to select a repeat
playback mode (repeat 1 or repeat
all). Press
REPEAT
until no repeat
mode is selected (shows on the
iPod/iPhone display) to cancel the
repeat playback.
To charge the iPod/iPhone:
•
You may charge the battery of your
iPod/iPhone through the universal
dock for iPod while the unit is
turned off (standby mode) or in the
AUX, Radio (FM band only) or iPod
mode. Charging control should be
operated on the iPod/iPhone.
Set wake time
This unit allows 2 wake times to be set.
1. Press
SET
on the top of the unit
until a WAKE 1 icon ( ,
or
) or a WAKE 2 icon ( ,
or
)
fl ashes on the display.
2. Press
<<
or
>>
on the top of the
unit to set the wake time. The time
decrements or increments follow by
a faster rate when you press and
hold the button.
3. To save and exit the wake setting,
wait for about 5 seconds or press
SET
until the clock setting icon (
) is off and the wake setting icons (
/
/
or /
/
) are either
off or stop fl ashing.
• To check the wake time after
setting, press
SET
until a WAKE
1 icon ( /
/
) or WAKE 2
icon ( /
/
) fl ashes and
the respective assigned wake time
shows on the display.
Select the wake source
You may be woken up by the alarm,
radio, or music from iPod/iPhone.
1. Set a wake time (refer to the above
instructions).
2. Press
WAKE 1
or
WAKE 2
to select
If Waking to Alarm
( , )
is
selected:
• Wake to Alarm uses
GRAD-U-
WAKE
, a gentle increase to the
maximum alarm tone volume over
30 to 45 seconds.
• If you set the wake function with
low volume level before going
to bed, we advise using Waking
to Alarm mode to wake you up
since the volume will automatically
increase.
If Waking to RADIO
(
,
)
is
selected:
3. Select a desired wake up radio
channel (refer to “Listening to the
radio”). If no wake up channel is
set, your last listening radio station
will be selected.
4. Adjust the volume to your desired
level.
5. Press
OFF
to turn off the unit.
SmartSnooze
TM
This operation allows extra sleep time
after the wake function is on. The alarm
will be off by pressing
SNOOZE
,
VOL +
,
VOL –, SLEEP
or
NAP
until the snooze
period is over. Snooze function can be
used repeatedly up to 1 hour. After this,
the wake function will turn off until the
next day.
To set the “quiet” period:
While pressing
SNOOZE
, press
<<
or
>>
on the top of the unit to set the
“quiet” period from 1 to 30 minutes
(default: 9 minutes). Release
SNOOZE
,
then the “quiet” period is set.
Turn off the wake
function
To silence the wake function
momentarily:
• Press
SNOOZE
. The alarm will sound
again when the snooze period is
over. (refer to “SmartSnooze
TM
”).
OR
NAP function
Sleep function
In the sleep mode, the radio, iPod or
AUX mode turns off automatically.
To set the sleep time:
1. Press
SLEEP
repeatedly to cycle
among the sleep time available
(90min, 60min, 30min, 15min and
OFF. 90min is the default setting).
• The
icon
fl ashes while selecting.
2. When the desired sleep time is
selected, release
SLEEP
and wait for
about 5 seconds, the sleep time is
now set.
• The
icon
lights on the display.
To listen to the radio:
• The radio turns on by default. If
not, press
RADIO
and select a radio
station as usual.
To listen to the iPod/iPhone:
•
Press
iPod
and then press
<<
or
>>
to select a fi le on the iPod/iPhone.
Playback will be in repeat all fi les
mode automatically.
• If iPod mode is selected in your last
sleep mode setting, the iPod/iPhone
will start to play, instead of the
radio.
• The radio will be played whenever
the iPod mode is selected but
without an iPod/iPhone connected.
For catnaps up to 2 hours without
disturbing the regular alarm settings,
the NAP function wakes you up after a
short period of time.
To set the NAP time:
1. Press
NAP
repeatedly to cycle
among the NAP time available
(10min, 20min, 30min, 60min,
90min, 120min and OFF. 20min is
the default setting).
• The
icon
NAP
fl ashes while
selecting.
2. When the desired NAP time is
selected, release
NAP
and wait for
about 5 seconds, the NAP time is
now set. The current time shows
and the icon
NAP
lights on the
display.
Audiovox Electronics Corp.
150 Marcus Blvd., Hauppauge, NY 11788
©2009 Audiovox Electronics Corp.
Trademark(s) ® Registered
Marque(s) ® Deposée(s)
Marca(s) ® Registrada(s)
www.rcaaudiovideo.com
Printed in China
To select auxiliary mode:
1. Connect your auxiliary source (e.g.
mp3 player) to the AUX input jack
on the top of the unit with an
audio cable (not supplied).
2. Press
AUX
to turn on the unit or to
switch to listen to AUX from other
modes.
• The auxiliary mode icon (
)
lights on the display.
Auxiliary source
• Adjust the auxiliary player to mid-
range volume and adjust the master
volume on the unit. Do not turn
the volume of the auxiliary player
too high as this may affect the
sound quality. For other playback
operations, control them on your
auxiliary player.
]
SEE MARKING ON BOTTOM OF PRODUCT
12 Month Limited Warranty
Applies to RCA Audio/Video
Products
• AUDIOVOX ELECTRONICS CORP. (the
Company) warrants to the original
retail purchaser of this product
that should this product or any
part thereof, under normal use and
conditions, be proven defective in
material or workmanship within
12 months from the date of
original purchase, such defect(s)
will be repaired or replaced with
reconditioned product (at the
Company’s option) without charge
for parts and repair labor.
• To obtain repair or replacement
within the terms of this Warranty,
the product is to be delivered with
proof of warranty coverage (e.g.
dated bill of sale), specifi cation of
defect(s), transportation prepaid, to
the Company at the address shown
below.
• This Warranty does not extend
to the elimination of externally
generated static or noise, to
correction of antenna problems,
loss/interruptions of broadcast or
internet service, to costs incurred for
installation, removal or reinstallation
of product, to corruptions caused
by computer viruses, spyware or
other malware, to loss of media,
fi les, data or content, or to
damage to tapes, discs, removable
memory devices or cards, speakers,
accessories, computers, computer
peripherals, other media players,
home networks or vehicle electrical
systems.
• This Warranty does not apply to
any product or part thereof which,
in the opinion of the Company,
has suffered or been damaged
through alteration, improper
installation, mishandling, misuse,
neglect, accident, or by removal
or defacement of the factory
serial number/bar code label(s).
THE EXTENT OF THE COMPANY’S
LIABILITY UNDER THIS WARRANTY
IS LIMITED TO THE REPAIR OR
REPLACEMENT PROVIDED ABOVE
AND, IN NO EVENT, SHALL THE
COMPANY’S LIABILITY EXCEED
THE PURCHASE PRICE PAID BY
PURCHASER FOR THE PRODUCT.
• This Warranty is in lieu of all other
express warranties or liabilities. ANY
IMPLIED WARRANTIES, INCLUDING
ANY IMPLIED WARRANTY OF
MERCHANTABILITY, SHALL BE
LIMITED TO THE DURATION OF
THIS WRITTEN WARRANTY. ANY
ACTION FOR BREACH OF ANY
WARRANTY HEREUNDER INCLUDING
ANY IMPLIED WARRANTY OF
MERCHANTABILITY MUST BE
BROUGHT WITHIN A PERIOD OF 24
MONTHS FROM DATE OF ORIGINAL
PURCHASE. IN NO CASE SHALL THE
COMPANY BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL
DAMAGES FOR BREACH OF THIS OR
ANY OTHER WARRANTY. No person
or representative is authorized
to assume for the Company any
liability other than expressed herein
in connection with the sale of this
product.
• Some states do not allow limitations
on how long an implied warranty
lasts or the exclusion or limitation
of incidental or consequential
damage so the above limitations or
exclusions may not apply to you.
This Warranty gives you specifi c
legal rights and you may also have
other rights which vary from state
to state.
How to make a warranty claim:
• If your product is capable of storing
content (such as an mp3 player,
digital voice recorder, etc), it is
recommended to make periodic
backup copies of content stored
on the product. If applicable,
before shipping a product, make
a back up copy of content or data
stored on the device. Also, it is
advisable to remove any personal
content which you would not want
exposed to others. IT IS LIKELY
THAT CONTENTS AND DATA ON
THE DEVICE WILL BE LOST DURING
SERVICE AND REFORMATTING.
AUDIOVOX ACCEPTS NO LIABILITY
FOR LOST CONTENT OR DATA,
OR FOR THE SECURITY OF ANY
PERSONAL CONTENT OR DATA ON
THE RETURNED DEVICE. Product
will be returned with factory
default settings, and without any
pre-loaded content which may have
been installed in the originally
purchased products. Consumer will
be responsible for reloading data
and content. Consumer will be
responsible to restore any personal
preference settings.
• Properly pack your unit. Include
any remotes, memory cards, cables,
etc. which were originally provided
with the product. However DO NOT
return any removable batteries,
even if batteries were included
with the original purchase. We
recommend using the original
carton and packing materials.
• Include evidence of purchase date
such as the bill of sale. Also print
your name and address and a
description of the defect. Send via
standard UPS or its equivalent to:
Audiovox Electronics Corp.
Attn: Service Department.
150 Marcus Blvd.
Hauppauge N.Y. 11788
1-877-833-3491
• Insure your shipment for loss or
damage. Audiovox accepts no
liability in case of damage or loss en
route to Audiovox.
Auto clock set
You do not have to set the clock time as
a built-in automatic time set system is
equipped in this clock powered by 2 AA
batteries (included and installed).
To get the clock time shown
correctly:
1. Plug for power
• Insert the plug of the unit into an
AC power outlet.
2. Select daylight saving
• Press and hold
DST
on the top of
the unit to turn on/off in areas
observing/not observing such time
change.
• A
confi rmation message
(on) or
(off) shows on the
display when you make a selection.
3. Select your time zone
• Press
TIME ZONE
repeatedly on the
top of the unit to cycle through the
time zones (EST > CST > MST > PST
> AKST > HST > AST > EST...). The
default time zone is Eastern (EST)
(refer to the maps on the right).
• The selected time zone shows on
the display briefl y with
TIME ZONE
icon fl ashes on the display.
•
Your clock is now set and ready
for use.
Warranty information
• Pay any charges billed to you by
the Exchange Center for service not
covered by the warranty.
• A new or refurbished unit will be
shipped to you freight prepaid.
What we will do:
Provide you with a new, or at our
option, a refurbished unit. The
exchange unit is under warranty for
the remainder of the original product’s
warranty period.
For Canada Customers, please ship
to:
Audiovox Return Centre
c/o Genco
6685 Kennedy Road,
Unit#3, Door 16,
Mississuaga, Ontario
L5T 3A5
a wake mode. Corresponding icon
lights on the front of the unit.
– Wake time 1 by alarm
– Wake time 1 by radio
– Wake time 1 by iPod/IPhone
– Wake time 2 by alarm
– Wake time 2 by radio
– Wake time 2 by iPod/IPhone
If Waking to iPod/iPhone
(
,
)
is
selected:
3. Adjust the volume to your desired
level. The last played fi le on the
iPod/iPhone will be played when the
wake function activates.
4. Press
OFF
to turn off the unit.
Note:
If there is no iPod/iPhone
connected, the alarm tone will sound
instead even if Waking to iPod mode
is selected.
To stop the wake function:
• Press
OFF
. The alarm will be on
again the following day at the same
time.
OR
To disable the wake function
completely:
• Press
WAKE 1
or
WAKE 2
repeatedly until no corresponding
wake indicator ( ,
,
or ,
,
) shows on the display.
• Only alarm tone is available in the
NAP mode.
To check the remaining NAP time:
• Press
NAP
once to show briefl y the
NAP time left.
To cancel the NAP function:
• Press and hold
NAP
or press
NAP
repeatedly to select
OFF
.
To turn off the NAP alarm:
• Press
NAP
or
OFF
to stop the NAP
alarm.
AUX IN
– Auxiliary input jack
STORE
– Save radio stations as presets
RECALL
– Recall preset radio stations
BRIGHTNESS
– Adjust display brightness
REPEAT
– Select repeat playback mode for iPod/
iPhone
SHUFFLE
– Select random playback mode for iPod/
iPhone
WAKE 1
– Activate or change Wake 1 settings
<<
or
>>
– Search radio frequencies; skip or search
music fi le in iPod; adjust clock time, wake time and
snooze period
SET
– Enter setting mode for setting clock time,
Wake 1 time or Wake 2 time
WAKE 2
– Activate or change Wake 2 settings
DST
– Daylight saving time (refer to “Clock”)
TIME ZONE
– Time zone selection (refer to “Clock”)
SLEEP
– Refer to “Sleep function”
NAP
– Refer to “NAP function”
SNOOZE
– Turn off the wake function
momentarily; turn off the sleep
function
VOL – / VOL +
– Adjust volume
WARNING:
Please avoid playing with
these buttons after entering the Clock/
Alarm set mode.
• When the wake
function activates, the
corresponding wake
icon will fl ash until the wake
function is turned off. The icon
will then stop fl ashing and keep
lighting up.
• When the AC power is
disconnected, all wake mode will
be reverted to alarm tone.
Important Battery Precautions
• Any battery may present a risk of
fi re, explosion, or chemical burn
if abused. Do not try to charge a
battery that is not intended to be
recharged, do not incinerate, and
do not puncture.
• Non-rechargeable batteries, such as
alkaline batteries, may leak if left in
your product for a long period of
time. Remove the batteries from the
product if you are not going to use
it for a month or more.
• If your product uses more than one
battery, do not mix types and make
sure they are inserted correctly.
Mixing types or inserting incorrectly
may cause them to leak.
• Discard any leaky or deformed
battery immediately. They may
cause skin burns or other personal
injury.
• Please help to protect the
environment by recycling or
disposing of batteries according to
federal, state, and local regulations.
• Do not expose batteries to excessive
heat (for example, by leaving them
in sunlight or close to fi re).
AM loop
antenna socket
• If no iPod/iPhone is connected
in the iPod mode, the unit will
exit the iPod mode and turn off
automatically.
Works with:
• iPhone 3G 8GB, 16GB
Made for:
• iPod touch 2nd generation 8GB,
16GB, 32GB
• iPod touch 1st generation 8GB,
16GB, 32GB
• iPod nano 4th generation
(video) 8GB, 16GB
• iPod nano 3rd generation
(video) 4GB, 8GB
• iPod classic 80GB, 160GB
• iPod nano 2nd generation
(aluminum) 2GB, 4GB, 8GB
• iPod 5th generation (video)
30GB, 60GB, 80GB
• iPod mini 4GB, 6GB
• iPod 4th generation 40GB
• iPod 4th generation (color
display) 20GB, 30GB, 40GB, 60GB
“Made for iPod” means that an
electronic accessory has been designed
to connect specifi cally to iPod and has
been certifi ed by the developer to meet
Apple performance standards.
“Works with iPhone” means that an
electronic accessory has been designed
to connect specifi cally to iPhone and has
been certifi ed by the developer to meet
Apple performance standards.
The descriptions and characteristics in
this owner’s manual are for the purpose
of general reference only and not as a
guarantee. In order to provide you with
the highest quality product, we may
make changes or modifi cations without
prior notice.
This is CLASS II apparatus with
double insulation, and no
protective earth provided.