SKU 98279
For technical questions, please call 1-800-444-3353.
Page 6
SpeciFicationS
AC Adapter
120 VAC, 60 Hz,
Output: 9 VAC, 300 mA
Data Saving Device Auto reset after power
loss
Mode
12/24 Hour
Battery Type
3V Lithium, CR2032
Dimensions
12-1/4” L x 7-5/8” H x
1-1/2” Deep
unpacking
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
inStructionS For
putting into uSe
read the entire important
SaFetY inFormation
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Functions-Setting the wall clock
Nail hole
Buttons:
A-B-C
Adapter
Plug
Figure 1
1. On the back of the Wall Clock are
three (3) buttons: A, B, and C. See
Figure 1
, above. Each of these but-
tons is used to adjust the Wall Clock
settings:
a:
Press “A” to scroll through and set
the Mode; Time, Hours/Minutes and
12 or 24 hour cycle.
B:
Press “B” to adjust the hour and
minute within each mode. Holding
down “B” will also change the Wall
Clock mode from a 12 hour clock to a
24 hour clock (military time).
c:
Press “C” to toggle between Hours
and Minutes.
Hanging the wall clock
The Wall Clock has a hole in the
1.
back which can be used to mount the
Clock onto a hook, nail or anchor (not
included) on a wall.
using the adapter
Plug the Adapter into a 120 V electri-
1.
cal outlet.
Plug the Adapter into the back of the
2.
Wall Clock, as shown in Figure 1.
