Page 6
For technical questions, please call 1-800-444-3353.
SKU 93661
Set up & operation
initial Battery charging
Before the Security Light can operate
properly, the batteries need to be fully
charged.
caution
the unit will not Function
unless:
The Solar Panel is first charged for
3 daYs of full sun
with the SENSOR POWER OFF.
To charge the batteries:
Switch OFF
on
oFF
Power OFF
Figure 9
1. Turn OFF the Power Switch.
Figure 10
1
2
3
Three days of full sunlight.
2.
allow 3 dayS oF Full Sunlight
to fully charge the batteries.
Switch ON
on
oFF
Power ON
Figure 11
3. After charging, turn the Power Switch
ON. The light will illuminate for a short
time when first switched on. This
indicates that it is working properly.
warning!
Do not remove the rubber
cover from the “ON/OFF” Switch (7).
The rubber cover prevents water from
entering the switch.
control Knobs
Underside of Motion
Detector Head (6)
SENS
Adjusting
Knob (10)
LUX
Adjusting
Knob (9)
TIME Adjusting Knob (11)
SenS tiMe luX
Figure 12
The Solar Powered Security Light has
3 different Control Knobs which control
the Motion Detector Head’s sensor.
They are sensitivity to light (LUX), the
light’s duration (TIME) and the sensor’s
sensitivity to motion (SENS).
note:
After each adjustment, walk the
detection area to check the adjustment
just made.
reV 09j, 09k, 10d
