Page 5
For technical questions, please call 1-800-444-3353.
SKU 93661
reV 10d
Install the Lamp
(up to 16 ft. from Solar Panel,
6 - 8 ft. above ground).
Figure 5
c. Using the Mounting Bracket as a
template, mark and then Drill holes for
the enclosed screws. Before drilling,
make sure that the drilling path is clear
of obstacles such as cables and
electrical lines. Place the Mounting
Bracket on the drilled holes and secure
with the Mounting Screws (3). Attach
the Lamp to the Bracket with the two
screws.
Figure 6
4. Carefully route the Power Cord of the
solar Panel to the Lamp (1) and plug it
into the outlet on the battery housing.
Adjust the Motion
Detector Head.
Figure 7
5. Swivel the Motion Detector Head (6)
below the light to the right or left so that it
faces the area where movement will
occur.
Figure 8
Dial
Swivel
left or
right.
Loosen Dial, tilt up or down, then tighten Dial.
6. To adjust it up or down, first loosen the
Dial counterclockwise, adjust the Head,
then tighten the Dial clockwise.
