background image

SKU 91006

    Page 4

Features include:

Large 1.5 cu. ft. capacity, Solid steel heavy
duty construction, Concealed, tamper-
proof hinges, Double lock with key and combination, Easy to use electronic keypad,
Removable wheels, Adjustable shelf, Padded floor

When unpacking, check to make sure
the following parts are included.

1.5 cu. ft. capacity floor safe
2 Override keys
Adjustable shelf
4 removable wheels/bolts, cotter pins (in
bag), 4 ‘C’ batteries
Override keyhole cover

If any parts are missing or broken,
please call Harbor Freight Tools at the
number on the cover of this manual.

Unpacking

Operation

This safe is ideal for home and business use. It may be used as a roll-about with the
included casters, or may be bolted to the wall for more permanent installation.

1.

To electronically open the safe: Input the numbers “159” on the electronic

keypad, then press the “A” key.  Once the green light comes on, turn the knob.
Then, turn the handle and pull the door open. NOTE: The knob must be turned
within 5 seconds of the green light coming on. If the knob is not turned, the
green light will go out, and the code must be reentered.

2.

To mechanically open the safe: In case the batteries have not been installed

or are worn out, you may open the safe using one of the Override Keys. Gently
detach the front panel. This will expose a key-operated lock. Insert the Override
Key into the lock and turn. Turn the knob, then the handle, and pull the door
open. Important reminder: Never lock your Override Keys into the safe. Store
them separately in a safe place.

Knob

Override Key

Override Cover

Key Pad

Green LED

Red LED

Yellow LED

Wheel Assembly

Note:    Wheels can be easily installed.
Place the Safe on its side for easy access
to the bottom of the Safe.  Assemble each
wheel using the included wheel axles.
Secure each wheel in place using Cotter
Pin.

       (See photo).

REV 09/04

Wheel

Cotter Pin

Wheel Axle

Summary of Contents for 91006








Reviews: