SKU 90553
PAGE 5
17.
Maintain a safe environment. Keep the area well lit. Make sure there is adequate
space surrounding the heater. Always keep the usage area free of obstructions,
grease, oil, trash, and other debris. Do not use a powered item in areas near
flammable chemicals, dusts, and vapors. Do not use this product in a damp or wet
location.
18.
Always keep the extension cord away from heated parts of the heater.
19.
Never leave the heater unattended when it is plugged into an electrical outlet.
Turn off the heater, and unplug it from its electrical outlet before leaving.
20.
Always unplug the heater from its electrical outlet and allow it to cool for at
least 10 minutes, before performing inspection, maintenance, or cleaning
procedures.
21.
This heater draws 8 Amps when working. To avoid overloading, do not use
other appliances on the same circuit when this heater is working.
22.
Do not insert or allow foreign objects to enter any grill or ventilation opening
on this heater. To do so may cause fire, electrical shock, or damage the unit.
23.
WARNING! People with pacemakers should consult their physician(s) before using
this product. Operation of electrical equipment in close proximity to a heart
pacemaker could cause interference or failure of the pacemaker.
GROUNDING
WARNING!
Improperly connecting the grounding wire can result in the risk of electric
shock. Check with a qualified electrician if you are in doubt as to whether the
outlet is properly grounded. Do not modify the power cord plug provided with
the tool. Never remove the grounding prong from the plug. Do not use the
tool if the power cord or plug is damaged. If damaged, have it repaired by
a service facility before use. If the plug will not fit the outlet, have a proper
outlet installed by a qualified electrician.
GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS
1.
Tools marked with “Grounding Required” have a three wire cord and three prong
grounding plug. The plug must be connected to a properly grounded outlet. If
the tool should electrically malfunction or break down, grounding provides a low
resistance path to carry electricity away from the user, reducing the risk of elec-
tric shock. (See Figure A, next page.)
2.
The grounding prong in the plug is connected through the green wire inside the
cord to the grounding system in the tool. The green wire in the cord must be the
