SKU 90553
PAGE 6
FIGURE A
only wire connected to the tool’s grounding system and must never be attached
to an electrically “live” terminal. (See Figure A.)
3.
Your tool must be plugged into an appropriate outlet, properly installed and
grounded in accordance with all codes and ordinances. The plug and outlet
should look like those in the following illustration. (See Figure A.)
FIGURE B
DOUBLE INSULATED ITEMS: ITEMS WITH TWO PRONG PLUGS
4.
Items marked “Double Insulated” do not require grounding. They have a special
double insulation system which satisfies OSHA requirements and complies with
the applicable standards of Underwriters Laboratories, Inc., the Canadian
Standard Association, and the National Electrical Code. (See Figure B.)
5.
Double insulated items may be used in either of the 120 volt outlets shown in the
following illustration. (See Figure B.)
