Page 4
For technical questions, please call 1-888-866-5797.
Item 62575
Setup Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this document including all text under subheadings therein
before set up or use of this product.
Battery Setup
1. Slide out the Battery Cover on the
side of the Remote Control unit.
2. Carefully remove protective tape from
battery. Replace the Battery Cover.
Installing Plug-In Receivers
1.
Plug light/appliance to be controlled
into the outlet on the Plug-In Receiver.
2. Plug the Receiver unit into any
standard indoor 120 VAC wall outlet.
3. Use only one Plug-In Receiver per
AC outlet. Maintain a minimum
distance of 24 inches between
individual Receiver units.
Note:
Do not install Plug-In Receivers
where they are blocked by large metal
objects or metal doors. Such obstructions
may reduce the receiving range.
