Page 2
For technical questions, please call 1-888-866-5797.
Item 57998
IMPORTANT SAFETY INFORMATION
Read all safety warnings, instructions, illustrations and specifications provided with this power tool.
Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
1.
WARNING: Risk of Electric Shock: When
used outdoors, install only to a covered
Class A GFCI protected receptacle that is
weatherproof, marked “Wet Location”, with
the power unit connected to the receptacle.
If one is not provided, contact a qualified
electrician for proper installation. Ensure that
the power unit and cord do not interfere with
completely closing the receptacle cover.
2.
WARNING: Risk of Electric Shock: Install
power unit 5 feet (1.5m) or more from a
pool or spa and 10 feet (3.05m) or more
from a fountain. Where the power unit is
installed outdoors, connect power unit to a
receptacle protected by a GFCI branch.
3. Suitable for outdoor use only.
4. Not for use with dimmers.
5. Mount at least 1 foot (30cm) above ground.
6. Do not connect two or more power supplies together.
7. Do not use extension cords.
8. For use with low voltage landscape
lighting systems only.
9. Use only with maximum 120W lamp load.
10. Mount the power unit in or on non-combustible
mounting surfaces only.
11. Main secondary wiring is intended for shallow
burial - less than 6 inches (152mm).
12. Not suitable for use with submersible
luminaries and pumps.
13. Do not repair or tamper with the cord or plug.
14. Do not submerge power unit in liquid.
15. Do not connect light fixtures with power on.
16. Assemble only according to these instructions.
Improper assembly can create hazards.
17. Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
18. Keep assembly area clean and well lit.
19. Keep bystanders out of the area during assembly.
20. Do not assemble when tired or when under the
influence of alcohol, drugs or medication.
21. This product is not a toy. Do not allow
children to play with or near this item.
22. Use as intended only.
23. Inspect before every use; do not use
if parts are loose or damaged.
24. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
SAVE THESE INSTRUCTIONS.
