Step 9)
Set the lips of the Drawer Sides(Q) onto the Drawer Base (K). Attach both (2)
Drawer Sides (Q) to the Drawer Base (K) but insert only rear and center Bolt (H), and
secure with Washer (N) and Nut (P)-see Figure 3.
Drawer Side (Q)
Secure with Bolt, Washer
and Nut
Figure 3-Assembling the Drawer
Step 10)
Place the Drawer Front (L) with the lip on top and facing the front of the
Workbench. Insert three (3) Bolts (H), slide on Washers (N) and secure with
Nuts (P)-see Figure 3. Secure Drawer Front (L) and Drawer Backing (R) to
Drawer sides (Q) with Nut, Washer and Bolt-see Figure 4.
Drawer-Front (L)
Bolt-Washer-Nut
Figure 4-Fi
Figure 4
Step 11)
Measure and mark the center of the Wooden Top (I). Set the Drawer Rails (M)
equidistant from the midpoint. Set the rails in place and make certain that the
Middle Drawer will sit properly on the Rails (M). The Middle Drawer is 18-1/8" wide.
Step 12)
Attach each Drawer Rail (M) to the Wooden Top (I) with three (3) Wood Screws (S)-
See Figure 5.
Drawer Rail (M)
Figure 5-Attaching Drawer Rail and Legs
Step 13)
The Legs will be attached at each corner of the Wooden Top (I). Measure to make
certain that each Leg (G) is placed within the same distance from each corner.
Attach the Legs (G) to the Wooden Top (I) with three (3) Wood Screws (S) for each
Leg-see Figure 5.
Leg (G)
Wood Screw (S)
#47878
Page 5
Drawer Front with lip (L)
Wood Screw (S)
