Page 3
SKU 47664
For technical questions, please call 1-800-444-3353.
designed. Do not modify this Pump and do not use this tool for a purpose for which it
was not intended.
Stay aleRt.
Watch what you are doing, Use common sense. Do not operate Pump
when you are tired.
do not oVeRReacH.
Keep proper footing and balance at all times. Do not reach
over Pump.
cHecK FoR damaged PaRtS.
Before using this Pump, any part that appears dam-
aged should be carefully checked to determine that it will operate properly and perform
its intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any part
that is damaged should be properly repaired or replaced by a qualified technician.
RePlacement PaRtS and acceSSoRieS.
When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this tool. Approved accessories are available from Harbor Freight
Tools.
maintain PRoduct WitH caRe.
Keep this product clean and dry, and moving
parts lightly lubricated for better performance. Keep Handle dry, clean and free from oil,
grease, and solvents.
maintenance.
Service and maintenance should be performed regularly by a qualified
technician.
The warnings, cautions, and instructions discussed in this instruction manual cannot
cover all possible conditions and situations that may occur. It must be understood the
operator that common sense and caution are factors which cannot be built into this prod-
uct, but must be supplied by the operator.
note:
This pump is suitable for transferring noncorrosive petroleum based fluids, gasoline,
kerosene, and light oils. Do not use with acids, alkaline solutions, trichlene, perchlene,
thinner, etc. Never pump used, dirty oil or fluid in this pump. Do not attempt to pump
alcohol-based liquids.
unPacKing
When unpacking, check to make sure all parts shown on the Assembly List (page #5)
are included. If any parts are missing or broken, (page #6) please call Harbor Freight Tools at
the number shown on the cover of this manual as soon as possible.
11.
12.
13.
14.
15.
16.
17.
ReV 06b
Brought to You By Augusta Flint
