SKU 47274
For technical questions, please call 1-800-444-3353.
Page 2
SPECIFICATIONS
Power Supply
120 V~, 60 Hz, 1.0 AMP
Container Capacity 32 Ounces
Pressure
175 PSI
Flow Rate
5.1 GPH
Maximum Viscosity 30 (Seconds) Refer to page 5 (test).
Gun Dimensions
9-1/2” H x 4-1/2” W (weight = 3 lb.)
Accessories
Viscosity Cup with hanger/ Four Nozzle Tips including:
2 - .032” (0.8mm), 1 - .021” (0.5mm),
1 - Extended Tip - .021” (0.5mm)
HOUSEHOLd USE ONLY.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
SAFETY WARNINGS ANd PRECAUTIONS
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
Keep work area clean.
1.
Cluttered areas invite injuries.
Observe work area conditions.
2.
Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids. Do not spray near open
flames, pilot lights, or any other heat source. Do not smoke while working with spraying
tools. Always work in a well ventilated area. Paints, sealers, stains and thinner emit
toxic fumes and are extremely flammable.
Keep children away.
3.
Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
Store idle equipment.
4.
When not in use, tools must be stored in a dry location to inhibit
rust. Always lock up tools and keep out of reach of children.
do not force tool.
5.
It will do the job better and more safely at the rate for which it
was intended. Do not use inappropriate attachments in an attempt to exceed the tool
capacity.
Use the right tool for the job.
6.
Do not attempt to force a small tool or attachment to
do the work of a larger industrial tool. There are certain applications for which this tool
was designed. Do not modify this tool and do not use this tool for a purpose for which
it was not intended.
E222975
REV 06h, 07d, 08a, 08h, 08i
