.
SKU 40107
PAGE 4
4.
Turn the Glider Seat over with the bottom side showing. (See Figure 3) With a pencil,
mark a line on the center of the Wood Slats (#6). Place the Middle Bracket (#5) on that
pencil mark so the hole align. Use Wood Screws (#11) to anchor the Middle Bracket
(#5).
Figure 3
#11
#5
#11
5.
See Figure 4A. Fit the Plastic Washers (#16) to the top of the Flat Swing Arms (#4). Fit
the Side of Plastic Washers (#16) of the Flat Swing Arms (#4) to the Top Tube (#1).
Insert the Bolts (#10), each with one Large Washer (#15). Secure the other side with
Large Nuts (#13) and Large Washers (#15). See Figure 4B. Do not completely tighten
the Large Nuts (#13). This allows the Flat Swing Arms (#4) to rotate freely.
#4
#16 #16
#4
#13
#15
#15 #10
#13
#15
#16
#10
#15
Figure 4A
Figure 4B
6.
With your helper, place the Glider Seat into the Seat Base. One person lifts up one side
of Glider Seat. Align with the lower end of the Flat Swing arms (#4). Secure with Bolts
(#10), Large Washer (#15), and Plastic Washers (#16) on both sides of the Flat Swing
Arms (#4). See Figure 4C. Tighten on other side with Large Nuts (#13) and Large
Washers (#15).
7.
Tighten all the other nuts and screws to secure the Glider. When finished, turn Glider
over. It is now ready to use.
Figure 4C
Brought to You by Augusta Flint
