9.
DO NOT ALLOW CHILDREN TO STAND
upon or put their fingers in moving parts of Glider.
10.
BE SURE GLIDER IS ON LEVEL SURFACE.
It is comfortable and adds charm to
garden or patio.
11.
BE AWARE OF MOVING PARTS.
Keep hands and fingers away from moving parts.
SKU 40107
PAGE 3
.
OPERATING INSTRUCTIONS
NOTE: Choose the area you wish to place your Glider and assemble close by.
It is important to have two people involved in assembling Glider. Do not tighten all
hardware unless instructions require. This can be done when Glider is fully
assembled.
ASSEMBLY INSTRUCTIONS
1.
Attach Top Tubes (#1) to End Tubes (#2) using Phillips Head Screws (#9), small
Washers (#14), and Small Nuts (#12). See Figure 1.
Figure 1
#1
#2
#7
#9
#9
#14
#12
#14
#8
#12
Figure 2
#14
#6 (4 on back)
(5 on seat)
#3
#8
#14
#12
2.
Align the Wood Arm Rest (#7) over the holes on the Top Tubes (#1). Insert Flat Head
Screws (#8) and tighten with Small Washers (#14) and Small Nuts (#12) on the
other side.
3.
You and your helper can hold the two Seat Tubes (#3) parallel to each other. Be sure
they are on a flat surface. Align the 9 Wood Slats (#6) with the holes on the Seat Tubes
(#3). Insert the Flat Head Screws (#8) through the Wood Slats (#6) and holes on Seat
Tubes (#3). Attach with Small Washers (#14) and Small Nuts (#12). Do not tighten the
Small Nuts (#12) at this time. See Figure 2.
Brought to You by Augusta Flint
