1.
This Battery Pack (#14) will last for many, many hours if maintained and charged properly.
If after acceptable usage, when Battery wears out, it can be replaced. Always make sure the
electrical cord is unplugged when removing the Battery.
2.
To remove and replace Battery Pack (#14), remove screws from the base of the Camping Light
Lampstand (#11). Pull out Battery Pack (#14) to replace. There is a metal brace that holds the
Battery in place.
See Figure D.
After releasing the metal brace, disconnect wires from the Battery.
PLEASE NOTE:
The
positive
and
negative
wires are color-coded Red and Black.
See Figure C.
Re-attach new Battery in the same configuration as the Battery you are removing. Replace
Lampstand (#11) and follow the above charging instructions.
REPLACING BATTERY
REPLACING LAMP TUBES
Warning:
When replacing Fluorescent Tubes (#5), do not touch Tubes. The oil from your skin can
reduce Tube’s life.
Caution:
Only use identical replacement parts available at Harbor Freight Tools.
Figure D
#14
Figure E
Red
Wire
1.
Set Switch (#10) to OFF position. Take off Overhead Guard (#2).
2.
Unscrew the metal nut and turn the metal connector holding the Tubes (#5).
3.
Make sure Tubes are cool, and using gloves remove the defective Tubes and replace with new
10W Tubes.
SKU 38077
PAGE 4
