19
OPERATING INSTRUCTIONS
1. To operate the fan using the remote, press and release
the following buttons:
1 - High fan speed
2 - Medium fan speed
3 - Low fan speed
4 - Fan Power - Turns the fan off.
Light Delay Off mode -
Press and hold the fan
power button (4) for five seconds, which will turn
off light after one minute. The LED indicator on the
remote will flash four times to confirm mode setting.
5 - Light Control:
Incandescent Bulbs
- Press light control to turn
lights off and on. Press and hold light control to dim
or brighten the lights.
CFL Bulbs
-Turns the lights on and off.
Note:
The
dimmer function does not work with CFL bulbs.
6 - D/CFL Switch: Switch should be set to “D” to
correspond with the included incandescent bulbs,
which will enable the dimming function. Flip to “CFL”
if you change to corresponding bulbs.
2. The reverse switch is located on top of motor assembly (L).
Using a ceiling fan will allow you to raise your
thermostat setting in summer and lower your thermostat
setting in winter without feeling a difference in your
comfort.
Note:
Wait for the fan to stop before moving
the reverse switch.
In warmer weather,
push the reverse switch left which
will result in downward airflow creating a wind chill effect
(Fig. 2a).
In cooler weather,
push the reverse switch right which
will result in upward airflow that can help move hot air
off the ceiling area (Fig. 2b).
Important:
The reverse switch must be set either
completely left or right in order for the fan to function
correctly. If the reverse switch is set in the middle
position, the fan will not operate (Fig. 2c).
1
2
3
4
5
6
2
1
Front
Back
L
2
LED Indicator
Fig. 2a
Fig. 2b
Fig. 2c
