18
FINAL INSTALLATION
13.Remove the battery cover from the back of the
remote found in remote pack (V). Insert the battery
from remote pack (V) into the remote; ensure
polarity of battery matches the polarity indicated in
the battery compartment -- positive (+) to positive
(+) and negative (-) to negative (-). Replace the
battery cover and press the fan power button on the
remote to ensure the LED indicator illuminates and
the remote turns on the fan.
Note:
If remote doesn’t turn on the fan, see
Troubleshooting
(page 21).
14.
OPTIONAL:
If you wish to install the wall bracket
from remote pack (V), choose desired location
and insert screws from remote pack (V) into holes
of wall bracket and into installation site. Store the
remote from remote pack (V) on the wall bracket
by placing the slot on the back of the remote onto
the wall bracket.
15. Turn on the circuit breakers and the wall switch to
the fan supply line leads.
Assembly is complete.
13
14
15
Wall Bracket
Wall
Bracket
Slot
Screw
Battery
Battery
Compartment
LED Indicator
Fan Power
Remote
