14
FINAL INSTALLATION
1. Align the canopy (B) over the loose mounting bracket
screws (Z) preassembled on mounting bracket
(A). Place the keyholes of the canopy (B) onto the
mounting bracket screws (Z) and rotate the canopy
(B) clockwise.
2. Secure the canopy (B) with the mounting bracket
screws (Z) previously removed (Step 4, page 8).
Tighten all mounting bracket screws (Z) securely.
3. Place the blade arm (H) onto the blade (K). Place
the blade medallion (I) into the three holes on the
opposite side of the blade (K). Secure the blade arm
(H) and blade medallion (I) to the blade (K) using the
blade screws (BB). Repeat this step for the remaining
blades (K).
Hardware Used
BB
Blade Screw
x 15
K
BB
I
H
3
B
Z
B
A
Z
1
2
Helpful Hint:
The downrod (E), canopy cover (C) and yoke cover (D) are not used in this type of
installation.
