10
11
Lowes.com/harborbreeze
Lowes.com/harborbreeze
ASSEMBLY INSTRUCTIONS
15
I
Screw
16
H
J
Female plug
Male plug
J
17
18
L
ASSEMBLY INSTRUCTIONS
Hardware Used
Blade Bracket Screw
x 6
FF
G
DD
EE
13
F
14
H
F
FF
Hardware Used
x 9
Decorative Nut
EE
Blade Screw
x 9
DD
Screw
13. Attach blade (G) under blade bracket (F) using three
decorative nuts (EE) and blade screws (DD). Securely
tighten blade screws (DD) into decorative nuts (EE).
Repeat for remaining blades (G), blade brackets (F),
decorative nuts (EE) and blade screws (DD).
14. Attach blade bracket (F) to motor housing assembly
(H) with two blade bracket screws (FF). Securely
tighten blade bracket screws (FF). Repeat for
remaining blade assemblies.
15. Remove preassembled screws from switch housing
cover (I).
16. Connect male plug from motor housing assembly (H)
to the female plug from light kit assembly (J).
WARNING:
To avoid possible fire or shock, power
should be turned off prior to the removal of the light kit.
17. Attach light kit assembly (J) to switch housing cover
(I). Align light kit assembly (J) holes with switch
housing cover (I) holes. Install previously removed
screws (Step 15, page 10) and tighten securely.
Note:
The wider gap in the edge of the switch housing
cover (I) should align with reverse switch on the light
kit assembly (J).
18. Install bulbs (L) into sockets.
Note:
This fan has an energy-saving wattage limiter
included. If you replace the bulbs with more than 190
watts, the light will automatically turn off. Please
ensure the bulb wattage is always less than 190 watts.
