14
Lowes.com/harborbreeze
FINAL INSTALLATION
3. Insert three blade screws (BB) along with blade
washers (CC) through one blade arm (M) and
into one blade (N) and into the blade screw caps
(DD). Secure each blade screw (BB) with a Phillips
screwdriver (not included), starting with the one in
the middle. Repeat this step for the remaining blades
(N) and blade arms (M).
4. Remove the motor screws (O) from the top of the
motor assembly (G). Align the two holes in the blade
arm (M) with two motor screw holes in the top of
the motor assembly (G). Secure the blade arm (M)
to motor assembly (G) using two motor screws (O).
Completely secure each blade arm (M) to the motor
assembly (G) before moving to next.
5. Remove the fitter plate screws (R) preassembled
to the fitter plate (H). Then, connect the 9-pin
connector from the fitter plate (H) to the 9-pin
connector from the light kit (J). Secure the light
kit (J) to the fitter plate (H) by reinstalling the fitter
plate screws (R).
BB
DD
CC
N
M
3
4
5
O
M
G
J
R
H
9-Pin Connector
