8
Lowes.com/harborbreeze
INITIAL INSTALLATION
4. Loosen all four mounting bracket screws (N),
then completely remove the two mounting bracket
screws (N) from the round holes of canopy (D). Set
aside for later use.
Detach mounting bracket (E) from canopy (D).
5. Attach mounting bracket (E) to outlet box (not
included) using screws and washers provided with the
outlet box.
CAUTION:
It is very important you use the proper
hardware when installing the mounting bracket (E) as
it will support the fan.
Important:
If using the angle mount, ensure the open
end of the mounting bracket (E) is installed facing the
higher point of the ceiling.
6. Remove the ten preassembled motor screws (L) and
five preassembled motor blocks from the underside of
the motor assembly (G). Discard the motor blocks but
save the motor screws (L) for later.
For
Standard or Angle Mounting Instructions
, continue
to page 9. For
Closemount Instructions
, proceed to
page 11.
G
5
4
D
N
E
6
Standard and
Closemount
Mounting
Angled
Mounting
E
E
Motor
Block
L
