14
FINAL INSTALLATION
4. Install the blade arm (P) to the underside of the motor
assembly (G) with motor screws (I) previously removed
(Step 6, page 8). Completely secure each blade arm (P)
to the motor assembly (G) before moving to the next.
Note:
The notch in the preassembled fitter plate (J)
allows a Phillips screwdriver access to motor screws (I).
5. Remove the three fitter plate screws (K) from the fitter
plate (J). Then connect the 9-pin connector from the
fitter plate (J) to the 9-pin connector from the light kit
(L).
Note:
Align the notch in the fitter plate (J) with the
reverse switch on the light kit (L).
6.
Secure the light kit (L) to the fitter plate (J) using the
three fitter plate screws (K).
4
5
P
L
K
M
J
I
G
6
K
L
Notch
Reverse
Switch
9-pin
Connector
