13
FINAL INSTALLATION
1. Align the canopy (E) over the loosened mounting
bracket screws (H) preassembled on mounting
bracket (D). Place the keyholes of the canopy (E)
onto the mounting bracket screws (H) and rotate the
canopy (E) clockwise.
2. Secure the canopy (E) with the mounting bracket
screws (H) previously removed (Step 4, page 8).
Tighten all mounting bracket screws (H) securely.
3. Partially insert the blade screws (BB) along with the
blade washers (CC) through the blade (Q) and blade
arm (P). Place the metal washer (UU) over the end of
the blade screw (BB) and secure with a hex nut (VV).
Repeat this step for the remaining blades (Q) and
blade arms (P).
Hardware Used
BB
Blade Screw
x 15
Blade Washer
x 15
Metal Washer
x 15
Hex Nut
x 15
1
3
BB
CC
VV
UU
Q
P
CC
UU
VV
2
E
H
E
H
D
