13
2
Front
Back
2
LED Indicator
Fan Power
Sleep Timer
Reverse Switch
LEARN
Variable Breeze
Home Shield
Light Delay
Light Control
Light Color
1
OPERATING INSTRUCTIONS
1. To operate the fan using remote control, press and
release the following buttons:
LED Indicator
- Indicates the three speeds of the fan. It
should illuminate when any remote button is pressed. If
not, replace the DC3V, CR2032 batteries.
Fan Power button has three options:
(
) - Turns the fan off or turns on fan at previously
selected speed.
(+) - Increase fan speed
( ) - Lower fan speed
Sleep Timers -
Turn off fan after 2 hours (2hr), 4 hours
(4hr), or 8 hours (8hr). Light dims to confirm function is
active. Press (
) button to deactivate.
Reverse Switch
- Changes direction of blade rotation.
For warm weather slide switch to the left and for cool
weather slide switch to the right.
Light Delay -
Delays turning off light for one minute
which allows safe exit from room. Light blinks to
confirm function is active.
Press Light Control button to
deactivate and turn the light off.
Home Shield™ -
Simulates occupancy while away from
home. Fan remains off and the light randomly turns on
for a minimum of five minutes and a maximum of 20
minutes. The light remains off for 60 minutes between
events. Press and hold button to activate. Light will blink
twice to confirm Home Shield is active. Press any button
to cancel.
Variable Breeze -
Simulates a natural breeze, as if you
were outside.
Light Control
-
Tap button to turn the light off and on.
Press and hold button to dim or brighten the lights.
Light Color -
Press and hold button to cycle through the
color temperatures from 2200K (warm white) to 6500K
(daylight).
2.
LEARN
- Syncs remote control (L) to receiver (see
troubleshooting for instructions).
